One of the most basic and significant aspects of woodworking is wood-turning; a factor the inexperienced woodworker may in some instances be unaware of. While it may seem complicated, wood turning is actually a rather simple task and can be quite enjoyable. To ensure the task remains enjoyable without difficulty, it is essential that one have the correct equipment available and maintain these tools. This article will provide information on the wood turning tools required and considerations you need to make for Sharpening Turning Tools.
1. The Edge Of The Blade
The first consideration to make is the edge of the blade being sharpened. Typically, a blade being sharpened would be worked to a razor edge in order to obtain precise cuts and shavings; however, this is not the case for turning wood tasks. Unlike clamped wood projects where the item is stationery, spinning wood presents with stiff bark and knots which can ruin a sharp edge. Based on this fact, it would be best to sharpen the edge of the turning tool allowing cutting to occur but not to a razor edge.
2. The Tools Required
As is seen above, the more common woodworking tools are those with very sharp edges and pointed stones; however, woodturning equipment are more robust. One of the most popular tools woodturning workers would use is the tool grinder. This item would be sharpened at the grinding point and it is this grinding point that would be used to remove bark or knots from the wood. The turning would be completed using a wheel with a grit edge.
3. The Frequency Of Sharpening
An individual who is experienced in the skill of sharpening a knife will typically find them sharpening infrequently; however, the woodturner, despite the level of experience, will be sharpening the grinder constantly. This is due to the fact that the wood being cut during turning is far more damaging to a sharpened point than the clean clamped items. Furthermore, the efficiency of a worker’s sharpening will determine the number of times one would be required to visit the wood lathe.
4. The Skill Required To Sharpen Tools
Unlike typical woodworking items operating with straight edges, the turning tools present with blades that can be straight, round, fluted and curved. To ensure all angles of the turning tool blade are sharpened correctly, it is essential that one is able to sharpen “freehand”. Of course, there are pieces of equipment that can sharpen items without the need to move the hand away from a sharpening board; however, completing the task freehand is far more beneficial. This allows one to sharpen numerous blade angles at any time.
5. The Tool Selection
The majority of blades are created using three materials: high carbon steel, high speed steel, and specialty steel. For all primary purposes, the majority of wood turning equipment utilizes the high speed steel option. This is due to the fact that high speed steel is able to hold a sharpened edge longer than high carbon steel; as well as being significantly less costly than the specialty steels.
6. The Cuts Required By Turning Tools
When referring to the cuts required by woodturning tools we are referring to the specific angle of the cuts completed by tools during any turning task. One example is the turning wood bowl tool. While the tool is identical, the configuration of the sharpening completed will determine the degree at which an angle is cut. A bowl with a gouge sharpened straight across will obtain a 45 degree angle cut; whereas, a gouge with a sharpened shape to form long wings will provide a 70 degree angle cut.
7. Be Relaxed
Arguably the most important consideration to make when sharpening woodturning tools is to relax. Tension when completing this maintenance task can result in poor technique, errors in the sharpening and consequentially errors in the woodturning. If an incorrect edge is, however, obtained or a poor edge created, it is easily amended and one should not become too concerned. Sharpening can be fun and should be viewed as enjoyable.
Final Words On The Matter
Sharpening turning tools woodworkers use is an essential skills available to all individuals. By using the information above one can easily engage in this task efficiently.